Skip to main content
XinmoJet

Open-system TIJ cartridges — factory direct

Technical Notes

Short, practical notes from the workbench: how to diagnose a coding fault, what the numbers on a specification actually mean, and where a supplier is quietly guessing. Written for the person standing at the line, not for a brochure. If you have to fix a code this week, start here.

Page 6 of 6

  • TIJ ink cartridge quote · 42 ml cartridge pricing · new printhead cartridge

    Why TIJ Cartridge Prices Vary: Eight Questions Before You Order

    A quote that says only 42 ml black TIJ cartridge does not give a purchasing team enough to compare offers. These eight questions cover printhead history, ink formulation, substrate testing, batch tracing and support, so two quotations can be compared on the same terms.

    Read more
  • Cartridge authenticity · HP45 · Quality control

    How to Tell a Genuine HP45 Cartridge from a Rebuilt One

    Rebuilt HP45 cartridges are sold as new all the time, and the difference shows up three weeks into a production run rather than on the invoice. Here is what actually distinguishes a genuine cartridge from a refilled or rebuilt one, and what you can check without a lab.

    Read more
  • DPI · Resolution · Print quality

    DPI and Resolution in Thermal Inkjet: What the Number Actually Tells You

    A 600 DPI printhead does not print 600 DPI codes, and a higher number is not automatically better for your application. Here is what DPI measures on a TIJ platform, how it relates to code legibility and scan rate, and how to read a supplier's resolution claim without being misled.

    Read more
  • 12.7 mm vs 25.4 mm TIJ cartridges · TIJ print width selection · 12.7 mm TIJ cartridge

    Choosing Between 12.7 mm and 25.4 mm TIJ Cartridges

    Print width is the constraint that decides what content is physically possible, and it is usually settled far too late in a project. Here is how to work backwards from the code you need to the width you must buy, including the QR code trap that catches most first-time buyers.

    Read more
  • Adhesion · Troubleshooting · Surface energy

    The Code Rubs Off: A Diagnostic Order for Adhesion Failures

    When a printed code smears, rubs off or fails a tape test, the cause is one of four things. Working through them in the right order saves you from replacing cartridges that were never the problem. This is the sequence we use when a customer sends us a failed sample.

    Read more

Want this confirmed on your own material?

We print on samples of your actual substrate and send them to you. Send the material, the line speed and the code content, and we will tell you honestly whether the fault is the ink, the surface or the line layout.